:: Pilatus ::

External design and structural structure

The retaining walls are armed with two iron grids over the entire area of the side walls and a 30 cm thick concrete with a fraction of 250
The walls of the stairwell and elevator are reinforced using two iron grids at the entire height and were cast using ready-mixed concrete of 250%
The stone used is Ruwaished, a rough bump of 25 cm, and Ruwaished, blasted, 12 cm
The foundations were insulated over the entire area using two layers of hot asphalt and burlap
The retaining walls were insulated using a first layer of petroleum asphalt and a second layer of cardboard
The external walls of the building were insulated using high-concentration foam and pressure between stone and brick at a rate of 6 cm and 3 cm, depending on the thickness of the walls

External design and structural structure

The foundations are a reinforced foundation, which is one large base connected over the entire actual area, and the columns are 45 cm high, armed with a lower iron network, an upper iron network, and ready-made concrete poured, crushed 250
The columns and ceilings are all made of ready-mixed concrete, with a strength of 250, and the examination in specialized laboratories for concrete reaches 380
All roofs are armed with a lower iron network and an upper iron network without the use of anchors